Optima XR Operation Guide

Machine Preparation

• Prior to use, ensure propane tank is full, and engine oil is at the full line

• Check burnisher pad condition by tipping machine to the right

• Buffing pad can be changed by removing center lock

• Inspect fuel line for wear or damage

• Use pin to adjust handle to appropriate level for operator

• Place and clamp propane tank in carriage with nozzle facing front of machine

• With propane valve closed, attach fuel line to the tank

• Buffing pad

---

Machine Operation

• Open propane valve, and set throttle to slow speed

• Lean machine back onto rear castor wheel prior to starting engine

• Engage engine by moving key to start position

• Move throttle to fast position

• Begin walking forward and slowly lower machine to the floor

• Continuously walk forward while operating machine to avoid damaging floor

• To stop using machine, tilt machine on back castor
• Set throttle to slow speed, close fuel valve and wait for engine to stop

• Turn key to off position once engine has stopped

---

Operation video guide